Natural Solid Bitumen Industrial Grade

Description

Product Description

Solid Bitumen, provided in a varying consistency of highly viscous to solid. Widely appreciated for its plasticity, waterproof, resistance, and adhesion towards acids and alkalis, industrial bitumen is very safe and inexpensive. Owing to the high dielectric strength, this product proves to be an excellent electrical insulator.

Features:

• Wide application area
• Tamper proof packaging
• Fats delivery

Applications:

ShaliKote® T-10 / ShaliKote® T-10A is recommended for waterproofing of leaky walls / surfaces or places where heating of bitumen is not desirable or prohibited

Advantages:
ShaliKote® T-10 gives a coating, which, when set, is impermeable to water and remains unaffected by attacks of industrial fumes, saline atmosphere, etc. It resists low temperature cracking and also does not crack under the influence of strong sunlight
ShaliKote® T-10A has smoother finish and better flow as compared to ShaliKote® T-10

Application Methodology:
Wire brush and clean the surface thoroughly to remove all dirt and loose particles
Dilute ShaliKote® T-10 from its pasty consistency to light consistency by adding water in the ratio of 1:1. Apply this diluted material on the roof surface as primer. No dilution should be done in case of ShaliKote® T-10A
When the primed surface is dry and has turned black from its original brown colour, apply ShaliKote® T-10 and allow the emulsion to break. It will turn black from its original brownish colour
When the emulsion has set in, spread coarse sand or crushed stone chips over the surface

Health & Safety:

• Lid of the container should be firmly fixed, when not in use
• Use goggles and hand gloves during application
• Clean hands with water after application

Packaging:
Available in 20 kg drum

Storage:
Keep in cool and dry place in air tight container under shed away from heat.